LNCF10 Series 3 in 1 Decoiler Straightener And Feeder
I.Introduction
1.3 in 1 uncoiler and straightener saves space and increase productivity.
2. Straightener and thickness adjustment by 4 worm gear micro-adjuster withreading 0.1mm advance reference indicator.
3.Feed and straightener roll with a hard chrome plated.
4.High rigid mechanical design sturdy construction, and high power output to secure proper straightening and feeding during the speed increasing efficiency.
5.Electric loop control system.
6.Power hold down arm device
7.Inverse curve roll, easy to set up the curve up or down of feeding exit direction.
8.Feeding line easily adjusted by advance worm gear screw Jacks device
9.Coil Material Entry support Assembly can bring the material into pinch rollers Automatically to save man power and increase safety,
10.Coil side guide
11.Outgoing catenary to assist and support the material
12.A Clusster gear set maximizes transmission of horse power.
13.Transforme
II.standard type
model
|
LNCF10-400 | LNCF10-600 | LNCF10-800 | LNCF10-1000 | LNCF10-1300 | LNCF10-1600 |
max.material width(mm) | 400 | 600 | 800 | 1000 | 1300 | 1600 |
material thickness(mm) | 1-10mm | |||||
coil weight(KG) | 5000/8000 | 8000/10000/15000 | ||||
coil inner Diameter(mm) | 610mm | |||||
coil outer diameter(mm) | 1500mm | |||||
expansion method | hydraulic expansion | |||||
uncoiler sensor | Photoelectric sensor | |||||
coil car | optional | |||||
shear | optional | |||||
Speed(m/min) | 20m/min |